How Is FTP Calculated?

What is a good FTP for a cyclist?

How do you go about improving FTP?ZonePercentage of FTPUse for256-75%Long, endurance rides376-90%Tempo rides aimed at improving endurance at high effort491-105%8-30 mintue intervals focused on improving FTP5106-120%3-8 minute ‘V02 max’ intervals3 more rows•Mar 23, 2020.

How much can I improve my FTP?

To improve performance on long climbs, do efforts at 100-110 percent of FTP on a sustained climb. Ideally, the power for the efforts should be the maximum power that can be sustained for each interval in the set, without dropping power from the first effort to the last.

What is a good FTP for a beginner cyclist?

Overton says the average newer rider with some fitness will hover in the 2.0 range, while top cyclists in the world hover around 7.0. That number won’t affect your training at all, but it’s a good way to see how you compare to other riders.

What is my watts per kg?

Watts per Kilo is your max power output, in watts, divided by your weight in kilos. For example, someone with a weight or mass of 80kg with a sustainable power output of 280 watts will have a power to weight ratio of 3.5 watts per kilo (3.5W/kg).

Is a power meter worth it?

Since power meters have become affordable, they’re definitely worth the investment. But don’t get fixated on the numbers. … A good coach can use your power numbers to ensure your training leads to specific goals.

What is a good power to weight ratio cycling?

This means you can generate 4.05 watts for every kilogram of body weight. A power to weight ratio of 4 to 4.5 is equivalent to a competitive Category 2 racer. A power to weight ratio of 5-6 would put you in the range of a Category 1 elite professional (according to Andy Coggan’s power profiling chart).

How accurate is strava Watts?

Given measured power data, Strava said that my average power for the whole ride was 164 watts and produced a total of 1,233 kilojoules of energy. Without direct measurements, Strava estimated that my average power was 177 watts and total energy production was 1,328 kilojoules. That’s an overall power error of 7.9%.

Is 200 watts good cycling?

Most pro cyclists produce about 200 to 300 watts on average during a four-hour tour stage. The recreational rider, on the other hand, might be only able to sustain this wattage during a 45-minute or hour-long spin class.

What is a pro cyclist FTP?

FTP is the acronym for Functional Threshold Power. In theory this is the max power that you can sustain for an hour’s riding. Once you know this number, it’s then used to set your training zones and help you gauge your riding efforts. … Because it comes from a power meter reading, the FTP is measured in watts.

What’s a good FTP test score?

47% of people have an FTP below 3.2W/kg. 45% of people have an FTP of 3.4W/kg or more. 8% of people have an FTP between 3.2W/kg and 3.4W/kg.

What is good watts per kg?

Here are the categories that they recommend you race based on your FTP data and watts per kilogram. The Zwift C category (next from the bottom) says that you should be able to ride at the level between 2.5 to 3.1 w/kg. If you want to succeed in the A category, you’ll need to be able to hit 4.0 w/kg or better.

What is a good FTP for a triathlete?

An FTP of 340 to 360 watts is typical for the top male riders. It is important to note that FTP in relation to the athlete’s weight is the best way to compare any two riders.

What was Lance Armstrong’s FTP?

The disgraced cyclist who had his seven Tour de France titles stripped rode 115 miles in 5 hours and 52 minutes, averaging 31.5 kph (19.6mph) and climbing 1579m (5182ft) over the rolling roads west of Austin. Armstrong wrote on Twitter, “6 hours/115 miles in miserable weather with @lawsoncraddock.

How many watts is 20 mph?

Cycling PowerSpeed – kmh (mph)Power (watts)Increase in power needed to increase speed by 2.5kmh22.5 (14)952025 (15.6)1202527.5 (17.2)1482830 (18.7)180325 more rows

What is Chris Froome’s FTP?

Contador’s FTP is rumoured to be exactly 420 watts, despite the Spaniard only weighing 62kgs – making us wonder how he manages to haemorrhage time to Froome when the road turns skyward.

What is an average FTP?

Average recreational cyclists would be about 2.5-3.0 Watts/Kg for FTP. People who race regularly may be 3.0-3.75. You get above 3.75-4.25 and those are local elite racers. Anything over 4.25 is domestic pro and it goes up from there.

How do you calculate FTP per kg?

To work out your power-to-weight ratio figure, simply divide your maximum power output (in watts) by your body mass in kilograms (kg). For example, an 80kg rider with a maximum sustainable power output of 280 watts has a power-to-weight ratio of 3.5 watts per kilo (commonly abbreviated as 3.5W/kg or 3.5W. kg-1).